On this page:
hash?
hash-equal?
hash-equal-always?
hash-eqv?
hash-eq?
hash-strong?
hash-weak?
hash-ephemeron?
hash
hashalw
hasheq
hasheqv
make-hash
make-hashalw
make-hasheqv
make-hasheq
make-weak-hash
make-weak-hashalw
make-weak-hasheqv
make-weak-hasheq
make-ephemeron-hash
make-ephemeron-hashalw
make-ephemeron-hasheqv
make-ephemeron-hasheq
make-immutable-hash
make-immutable-hashalw
make-immutable-hasheqv
make-immutable-hasheq
hash-set!
hash-set*!
hash-set
hash-set*
hash-ref
hash-ref-key
hash-ref!
hash-has-key?
hash-update!
hash-update
hash-remove!
hash-remove
hash-clear!
hash-clear
hash-copy-clear
hash-map
hash-map/  copy
hash-keys
hash-values
hash->list
hash-keys-subset?
hash-for-each
hash-count
hash-empty?
hash-iterate-first
hash-iterate-next
hash-iterate-key
hash-iterate-value
hash-iterate-pair
hash-iterate-key+  value
hash-copy
4.15.1 Additional Hash Table Functions
hash-union
hash-union!
hash-intersect
hash-filter
hash-filter-keys
hash-filter-values

4.15 Hash Tables🔗ℹ

+Hash Tables in The Racket Guide introduces hash tables.

A hash table (or simply hash) maps each of its keys to a single value. For a given hash table, keys are equivalent via equal?, equal-always?, eqv?, or eq?, and keys are retained either strongly, weakly (see Weak Boxes), or like ephemerons. A hash table is also either mutable or immutable. Immutable hash tables support effectively constant-time access and update, just like mutable hash tables; the constant on immutable operations is usually larger, but the functional nature of immutable hash tables can pay off in certain algorithms. Use immutable? to check whether a hash table is immutable.

Immutable hash tables actually provide O(log N) access and update. Since N is limited by the address space so that log N is limited to less than 30 or 62 (depending on the platform), log N can be treated reasonably as a constant.

For equal?-based hashing, the built-in hash functions on strings, pairs, lists, vectors, prefab or transparent structures, etc., take time proportional to the size of the value. The hash code for a compound data structure, such as a list or vector, depends on hashing each item of the container, but the depth of such recursive hashing is limited (to avoid potential problems with cyclic data). For a non-list pair, both car and cdr hashing is treated as a deeper hash, but the cdr of a list is treated as having the same hashing depth as the list.

A hash table can be used as a two-valued sequence (see Sequences). The keys and values of the hash table serve as elements of the sequence (i.e., each element is a key and its associated value). If a mapping is added to or removed from the hash table during iteration, then an iteration step may fail with exn:fail:contract, or the iteration may skip or duplicate keys and values. See also in-hash, in-hash-keys, in-hash-values, and in-hash-pairs.

Two hash tables cannot be equal? unless they have the same mutability, use the same key-comparison procedure (equal?, equal-always?, eqv?, or eq?), both hold keys strongly, weakly, or like ephemerons. Empty immutable hash tables are eq? when they are equal?.

Changed in version 7.2.0.9 of package base: Made empty immutable hash tables eq? when they are equal?.

Caveats concerning concurrent modification: A mutable hash table can be manipulated with hash-ref, hash-set!, and hash-remove! concurrently by multiple threads, and the operations are protected by a table-specific semaphore as needed. Several caveats apply, however:

Caveat concerning mutable keys: If a key in an equal?-based hash table is mutated (e.g., a key string is modified with string-set!), then the hash table’s behavior for insertion and lookup operations becomes unpredictable.

A literal or printed hash table starts with #hash, #hashalw, #hasheqv, or #hasheq. See Reading Hash Tables for information on reading hash tables and Printing Hash Tables for information on printing hash tables.

procedure

(hash? v)  boolean?

  v : any/c
Returns #t if v is a hash table, #f otherwise.

See also immutable-hash? and mutable-hash?.

procedure

(hash-equal? ht)  boolean?

  ht : hash?
Returns #t if ht compares keys with equal?, #f if it compares with eq?, eqv?, or equal-always?.

procedure

(hash-equal-always? ht)  boolean?

  ht : hash?
Returns #t if ht compares keys with equal-always?, #f if it compares with eq?, eqv?, or equal?.

Added in version 8.5.0.3 of package base.

procedure

(hash-eqv? ht)  boolean?

  ht : hash?
Returns #t if ht compares keys with eqv?, #f if it compares with equal?, equal-always?, or eq?.

procedure

(hash-eq? ht)  boolean?

  ht : hash?
Returns #t if ht compares keys with eq?, #f if it compares with equal?, equal-always?, or eqv?.

procedure

(hash-strong? ht)  boolean?

  ht : hash?
Returns #t if ht retains its keys strongly, #f if it retains keys weakly or like ephemerons.

Added in version 8.0.0.10 of package base.

procedure

(hash-weak? ht)  boolean?

  ht : hash?
Returns #t if ht retains its keys weakly, #f if it retains keys strongly or like ephemerons.

procedure

(hash-ephemeron? ht)  boolean?

  ht : hash?
Returns #t if ht retains its keys like ephemerons, #f if it retains keys strongly or merely weakly.

Added in version 8.0.0.10 of package base.

procedure

(hash key val ... ...)

  (and/c hash? hash-equal? immutable? hash-strong?)
  key : any/c
  val : any/c

procedure

(hashalw key val ... ...)

  (and/c hash? hash-equal-always? immutable? hash-strong?)
  key : any/c
  val : any/c

procedure

(hasheq key val ... ...)

  (and/c hash? hash-eq? immutable? hash-strong?)
  key : any/c
  val : any/c

procedure

(hasheqv key val ... ...)

  (and/c hash? hash-eqv? immutable? hash-strong?)
  key : any/c
  val : any/c
Creates an immutable hash table with each given key mapped to the following val; each key must have a val, so the total number of arguments to hash must be even.

The hash procedure creates a table where keys are compared with equal?, hashalw creates a table where keys are compared with equal-always?, hasheq procedure creates a table where keys are compared with eq?, hasheqv procedure creates a table where keys are compared with eqv?.

The key to val mappings are added to the table in the order that they appear in the argument list, so later mappings can hide earlier mappings if the keys are equal.

Changed in version 8.5.0.3 of package base: Added hashalw.

procedure

(make-hash [assocs])

  (and/c hash? hash-equal? (not/c immutable?) hash-strong?)
  assocs : (listof pair?) = null

procedure

(make-hashalw [assocs])

  (and/c hash? hash-equal-always? (not/c immutable?) hash-strong?)
  assocs : (listof pair?) = null

procedure

(make-hasheqv [assocs])

  (and/c hash? hash-eqv? (not/c immutable?) hash-strong?)
  assocs : (listof pair?) = null

procedure

(make-hasheq [assocs])

  (and/c hash? hash-eq? (not/c immutable?) hash-strong?)
  assocs : (listof pair?) = null
Creates a mutable hash table that holds keys strongly.

The make-hash procedure creates a table where keys are compared with equal?, make-hasheq procedure creates a table where keys are compared with eq?, make-hasheqv procedure creates a table where keys are compared with eqv?, and make-hashalw creates a table where keys are compared with equal-always?.

The table is initialized with the content of assocs. In each element of assocs, the car is a key, and the cdr is the corresponding value. The mappings are added to the table in the order that they appear in assocs, so later mappings can hide earlier mappings.

See also make-custom-hash.

Examples:
> (make-hash)

'#hash()

> (make-hash '([0 . 1] [42 . "meaning of life"] [2 . 3]))

'#hash((0 . 1) (2 . 3) (42 . "meaning of life"))

> (make-hash '([0 . 1] [1 . 2] [0 . 3]))

'#hash((0 . 3) (1 . 2))

> (make-hash (list (cons 0 1) (cons 'apple 'orange) (cons #t #f)))

'#hash((#t . #f) (0 . 1) (apple . orange))

> (make-hash '((0 1) (1 2) (2 3)))

'#hash((0 . (1)) (1 . (2)) (2 . (3)))

> (make-hash (list (cons + -)))

'#hash((#<procedure:+> . #<procedure:->))

Changed in version 8.5.0.3 of package base: Added make-hashalw.

procedure

(make-weak-hash [assocs])

  (and/c hash? hash-equal? (not/c immutable?) hash-weak?)
  assocs : (listof pair?) = null

procedure

(make-weak-hashalw [assocs])

  (and/c hash? hash-equal-always? (not/c immutable?) hash-weak?)
  assocs : (listof pair?) = null

procedure

(make-weak-hasheqv [assocs])

  (and/c hash? hash-eqv? (not/c immutable?) hash-weak?)
  assocs : (listof pair?) = null

procedure

(make-weak-hasheq [assocs])

  (and/c hash? hash-eq? (not/c immutable?) hash-weak?)
  assocs : (listof pair?) = null
Like make-hash, make-hasheq, make-hasheqv, and make-hashalw, but creates a mutable hash table that holds keys weakly.

Beware that values in a weak hash table are retained normally. If a value in the table refers back to its key, then the table will retain the value and therefore the key; the mapping will never be removed from the table even if the key becomes otherwise inaccessible. To avoid that problem, use an ephemeron hash table as created by make-ephemeron-hash, make-ephemeron-hashalw, make-ephemeron-hasheqv, or make-ephemeron-hasheq. For values that do not refer to keys, there is a modest extra cost to using an ephemeron hash table instead of a weak hash table, but prefer an ephemeron hash table when in doubt.

Changed in version 8.5.0.3 of package base: Added make-weak-hashalw.

procedure

(make-ephemeron-hash [assocs])

  (and/c hash? hash-equal? (not/c immutable?) hash-ephemeron?)
  assocs : (listof pair?) = null

procedure

(make-ephemeron-hashalw [assocs])

  (and/c hash? hash-equal-always? (not/c immutable?) hash-ephemeron?)
  assocs : (listof pair?) = null

procedure

(make-ephemeron-hasheqv [assocs])

  (and/c hash? hash-eqv? (not/c immutable?) hash-ephemeron?)
  assocs : (listof pair?) = null

procedure

(make-ephemeron-hasheq [assocs])

  (and/c hash? hash-eq? (not/c immutable?) hash-ephemeron?)
  assocs : (listof pair?) = null
Like make-hash, make-hasheq, make-hasheqv, and make-hashalw, but creates a mutable hash table that holds key-value combinations in the same way as an ephemeron.

Using an ephemeron hash table is like using a weak hash table and mapping each key to a ephemeron that pairs the key and value. An advantage of an ephemeron hash table is that the value need not be extracted with ephemeron-value from the result of functions like hash-ref. An ephemeron hash table might also be represented more compactly than a weak hash table with explicit ephemeron values.

Added in version 8.0.0.10 of package base.
Changed in version 8.5.0.3: Added make-ephemeron-hashalw.

procedure

(make-immutable-hash [assocs])

  (and/c hash? hash-equal? immutable? hash-strong?)
  assocs : (listof pair?) = null

procedure

(make-immutable-hashalw [assocs])

  (and/c hash? hash-equal-always? immutable? hash-strong?)
  assocs : (listof pair?) = null

procedure

(make-immutable-hasheqv [assocs])

  (and/c hash? hash-eqv? immutable? hash-strong?)
  assocs : (listof pair?) = null

procedure

(make-immutable-hasheq [assocs])

  (and/c hash? hash-eq? immutable? hash-strong?)
  assocs : (listof pair?) = null
Like hash, hashalw, hasheq, and hasheqv, but accepts the key–value mapping in association-list form like make-hash, make-hashalw, make-hasheq, and make-hasheqv.

Changed in version 8.5.0.3 of package base: Added make-immutable-hashalw.

procedure

(hash-set! ht key v)  void?

  ht : (and/c hash? (not/c immutable?))
  key : any/c
  v : any/c
Maps key to v in ht, overwriting any existing mapping for key.

See also the caveats concerning concurrent modification and the caveat concerning mutable keys above.

procedure

(hash-set*! ht key v ... ...)  void?

  ht : (and/c hash? (not/c immutable?))
  key : any/c
  v : any/c
Maps each key to each v in ht, overwriting any existing mapping for each key. Mappings are added from the left, so later mappings overwrite earlier mappings.

See also the caveats concerning concurrent modification and the caveat concerning mutable keys above.

procedure

(hash-set ht key v)  (and/c hash? immutable?)

  ht : (and/c hash? immutable?)
  key : any/c
  v : any/c
Functionally extends ht by mapping key to v, overwriting any existing mapping for key, and returning the extended hash table.

See also the caveat concerning mutable keys above.

procedure

(hash-set* ht key v ... ...)  (and/c hash? immutable?)

  ht : (and/c hash? immutable?)
  key : any/c
  v : any/c
Functionally extends ht by mapping each key to v, overwriting any existing mapping for each key, and returning the extended hash table. Mappings are added from the left, so later mappings overwrite earlier mappings.

See also the caveat concerning mutable keys above.

procedure

(hash-ref ht key [failure-result])  any

  ht : hash?
  key : any/c
  failure-result : failure-result/c
   = 
(lambda ()
  (raise (make-exn:fail:contract ....)))
Returns the value for key in ht. If no value is found for key, then failure-result determines the result:

Examples:
> (hash-ref (hash) "hi")

hash-ref: no value found for key

  key: "hi"

> (hash-ref (hash) "hi" 5)

5

> (hash-ref (hash) "hi" (lambda () "flab"))

"flab"

> (hash-ref (hash "hi" "bye") "hi")

"bye"

> (hash-ref (hash "hi" "bye") "no")

hash-ref: no value found for key

  key: "no"

See also the caveats concerning concurrent modification and the caveat concerning mutable keys above.

procedure

(hash-ref-key ht key [failure-result])  any

  ht : hash?
  key : any/c
  failure-result : failure-result/c
   = 
(lambda ()
  (raise (make-exn:fail:contract ....)))
Returns the key held by ht that is equivalent to key according to ht’s key-comparison function. If no key is found, then failure-result is used as in hash-ref to determine the result.

If ht is not an impersonator, then the returned key, assuming it is found, will be eq?-equivalent to the one actually retained by ht:

Examples:
> (define original-key "hello")
> (define key-copy (string-copy original-key))
> (equal? original-key key-copy)

#t

> (eq? original-key key-copy)

#f

> (define table (make-hash))
> (hash-set! table original-key 'value)
> (eq? (hash-ref-key table "hello") original-key)

#t

> (eq? (hash-ref-key table "hello") key-copy)

#f

If a mutable hash is updated multiple times using keys that are not eq?-equivalent but are equivalent according to the hash’s key-comparison procedure, the hash retains the first one:

Examples:
> (define original-key "hello")
> (define key-copy (string-copy original-key))
> (define table (make-hash))
> (hash-set! table original-key 'one)
> (hash-set! table key-copy 'two)
> (eq? (hash-ref-key table "hello") original-key)

#t

> (eq? (hash-ref-key table "hello") key-copy)

#f

Conversely, an immutable hash retains the key that was most-recently used to update it:

Examples:
> (define original-key "hello")
> (define key-copy (string-copy original-key))
> (define table0 (hash))
> (define table1 (hash-set table0 original-key 'one))
> (define table2 (hash-set table1 key-copy 'two))
> (eq? (hash-ref-key table2 "hello") original-key)

#f

> (eq? (hash-ref-key table2 "hello") key-copy)

#t

If ht is an impersonator, then the returned key will be determined as described in the documentation to impersonate-hash.

See also the caveats concerning concurrent modification and the caveat concerning mutable keys above.

Added in version 7.4.0.3 of package base.

procedure

(hash-ref! ht key to-set)  any

  ht : hash?
  key : any/c
  to-set : failure-result/c
Returns the value for key in ht. If no value is found for key, then to-set determines the result as in hash-ref (i.e., it is either a thunk that computes a value or a plain value), and this result is stored in ht for the key. (Note that if to-set is a thunk, it is not invoked in tail position.)

See also the caveats concerning concurrent modification and the caveat concerning mutable keys above.

procedure

(hash-has-key? ht key)  boolean?

  ht : hash?
  key : any/c
Returns #t if ht contains a value for the given key, #f otherwise.

procedure

(hash-update! ht key updater [failure-result])  void?

  ht : (and/c hash? (not/c immutable?))
  key : any/c
  updater : (any/c . -> . any/c)
  failure-result : failure-result/c
   = 
(lambda ()
  (raise (make-exn:fail:contract ....)))
Updates the value mapped by key in ht by applying updater to the value. The value returned by updater becomes the new mapping for key, overwriting the original value in ht.

Examples:
(define h (make-hash))
(hash-set! h 'a 5)

 

> (hash-update! h 'a add1)
> h

'#hash((a . 6))

The optional failure-result argument is used when no mapping exists for key already, in the same manner as in hash-ref.

Examples:
(define h (make-hash))

 

> (hash-update! h 'b add1)

hash-update!: no value found for key: 'b

> (hash-update! h 'b add1 0)
> h

'#hash((b . 1))

See also the caveats concerning concurrent modification and the caveat concerning mutable keys above.

procedure

(hash-update ht key updater [failure-result])

  (and/c hash? immutable?)
  ht : (and/c hash? immutable?)
  key : any/c
  updater : (any/c . -> . any/c)
  failure-result : failure-result/c
   = 
(lambda ()
  (raise (make-exn:fail:contract ....)))
Functionally updates the value mapped by key in ht by applying updater to the value and returning a new hash table. The value returned by updater becomes the new mapping for key in the returned hash table.

Examples:
(define h (hash 'a 5))

 

> (hash-update h 'a add1)

'#hash((a . 6))

The optional failure-result argument is used when no mapping exists for key already, in the same manner as in hash-ref.

Examples:
(define h (hash))

 

> (hash-update h 'b add1)

hash-update: no value found for key: 'b

> (hash-update h 'b add1 0)

'#hash((b . 1))

See also the caveat concerning mutable keys above.

procedure

(hash-remove! ht key)  void?

  ht : (and/c hash? (not/c immutable?))
  key : any/c
Removes any existing mapping for key in ht.

See also the caveats concerning concurrent modification and the caveat concerning mutable keys above.

procedure

(hash-remove ht key)  (and/c hash? immutable?)

  ht : (and/c hash? immutable?)
  key : any/c
Functionally removes any existing mapping for key in ht, returning ht (i.e., a result eq? to ht) if key is not present in ht.

See also the caveat concerning mutable keys above.

procedure

(hash-clear! ht)  void?

  ht : (and/c hash? (not/c immutable?))
Removes all mappings from ht.

If ht is not an impersonator, then all mappings are removed in constant time. If ht is an impersonator, then each key is removed one-by-one using hash-remove!.

See also the caveats concerning concurrent modification and the caveat concerning mutable keys above.

procedure

(hash-clear ht)  (and/c hash? immutable?)

  ht : (and/c hash? immutable?)
Functionally removes all mappings from ht.

If ht is not a chaperone, then clearing is equivalent to creating a new hash table, and the operation is performed in constant time. If ht is a chaperone, then each key is removed one-by-one using hash-remove.

procedure

(hash-copy-clear ht [#:kind kind])  hash?

  ht : hash?
  kind : (or/c #f 'immutable 'mutable 'weak 'ephemeron) = #f
Produces an empty hash table with the same key-comparison procedure as ht, with either the given kind or the same kind as the given ht.

If kind is not supplied or #f, produces a hash table of the same kind and mutability as the given ht. If kind is 'immutable, 'mutable, 'weak, or 'ephemeron, produces a table that’s immutable, mutable with strongly-held keys, mutable with weakly-held keys, or mutable with ephemeron-held keys respectively.

Changed in version 8.5.0.2 of package base: Added the kind argument.

procedure

(hash-map ht proc [try-order?])  (listof any/c)

  ht : hash?
  proc : (any/c any/c . -> . any/c)
  try-order? : any/c = #f
Applies the procedure proc to each element in ht in an unspecified order, accumulating the results into a list. The procedure proc is called each time with a key and its value, and the procedure’s individual results appear in order in the result list.

If a hash table is extended with new keys (either through proc or by another thread) while a hash-map or hash-for-each traversal is in process, arbitrary key–value pairs can be dropped or duplicated in the traversal. Key mappings can be deleted or remapped (by any thread) with no adverse affects; the change does not affect a traversal if the key has been seen already, otherwise the traversal skips a deleted key or uses the remapped key’s new value.

See also the caveats concerning concurrent modification above.

If try-order? is true, then the order of keys and values passed to proc is normalized under certain circumstances—including when every key is one of the following and with the following order (earlier bullets before later):

Changed in version 6.3 of package base: Added the try-order? argument.
Changed in version 7.1.0.7: Added guarantees for try-order?.

Examples:
> (hash-map (make-hash '([0 . 1] [1 . 2] [2 . 3])) (λ (k v) k))

'(0 1 2)

> (hash-map (make-hash '([0 . 1] [1 . 2] [2 . 3])) (λ (k v) v))

'(1 2 3)

procedure

(hash-map/copy ht proc [#:kind kind])  hash?

  ht : hash?
  proc : (any/c any/c . -> . (values any/c any/c))
  kind : (or/c #f 'immutable 'mutable 'weak 'ephemeron) = #f
Applies the procedure proc to each element in ht in an unspecified order, accumulating the results into a new hash with the same key-comparison procedure as ht, with either the given kind or the same kind as the given ht.

If kind is not supplied or #f, produces a hash table of the same kind and mutability as the given ht. If kind is 'immutable, 'mutable, 'weak, or 'ephemeron, produces a table that’s immutable, mutable with strongly-held keys, mutable with weakly-held keys, or mutable with ephemeron-held keys respectively.

Examples:
> (hash-map/copy #hash((a . "apple") (b . "banana"))
                 (lambda (k v) (values k (string-upcase v))))

'#hash((a . "APPLE") (b . "BANANA"))

> (define frozen-capital
    (hash-map/copy (make-hash '((a . "apple") (b . "banana")))
                   (lambda (k v) (values k (string-upcase v)))
                   #:kind 'immutable))
> frozen-capital

'#hash((a . "APPLE") (b . "BANANA"))

> (immutable? frozen-capital)

#t

Added in version 8.5.0.2 of package base.

procedure

(hash-keys ht [try-order?])  (listof any/c)

  ht : hash?
  try-order? : any/c = #f
Returns a list of the keys of ht in an unspecified order.

If try-order? is true, then the order of keys is normalized under certain circumstances. See hash-map for further explanations on try-order? and on information about modifying ht during hash-keys.

Changed in version 8.3.0.11 of package base: Added the try-order? argument.

procedure

(hash-values ht [try-order?])  (listof any/c)

  ht : hash?
  try-order? : any/c = #f
Returns a list of the values of ht in an unspecified order.

If try-order? is true, then the order of values is normalized under certain circumstances, based on the ordering of the associated keys. See hash-map for further explanations on try-order? and on information about modifying ht during hash-values.

Changed in version 8.3.0.11 of package base: Added the try-order? argument.

procedure

(hash->list ht [try-order?])  (listof (cons/c any/c any/c))

  ht : hash?
  try-order? : any/c = #f
Returns a list of the key–value pairs of ht in an unspecified order.

If try-order? is true, then the order of keys and values is normalized under certain circumstances. See hash-map for further explanations on try-order? and on information about modifying ht during hash->list.

Changed in version 8.3.0.11 of package base: Added the try-order? argument.

procedure

(hash-keys-subset? ht1 ht2)  boolean?

  ht1 : hash?
  ht2 : hash?
Returns #t if the keys of ht1 are a subset of or the same as the keys of ht2. The hash tables must both use the same key-comparison function (equal?, equal-always?, eqv?, or eq?), otherwise the exn:fail:contract exception is raised.

Using hash-keys-subset? on immutable hash tables can be much faster than iterating through the keys of ht1 to make sure that each is in ht2.

Added in version 6.5.0.8 of package base.

procedure

(hash-for-each ht proc [try-order?])  void?

  ht : hash?
  proc : (any/c any/c . -> . any)
  try-order? : any/c = #f
Applies proc to each element in ht (for the side-effects of proc) in an unspecified order. The procedure proc is called each time with a key and its value.

See hash-map for information about try-order? and about modifying ht within proc.

Changed in version 6.3 of package base: Added the try-order? argument.
Changed in version 7.1.0.7: Added guarantees for try-order?.

procedure

(hash-count ht)  exact-nonnegative-integer?

  ht : hash?
Returns the number of keys mapped by ht.

For the CS implementation of Racket, the result is always computed in constant time and atomically. For the BC implementation of Racket, the result is computed in constant time and atomically only if ht does not retain keys weakly or like an ephemeron, otherwise, a traversal is required to count the keys.

procedure

(hash-empty? ht)  boolean?

  ht : hash?
Equivalent to (zero? (hash-count ht)).

procedure

(hash-iterate-first ht)  (or/c #f exact-nonnegative-integer?)

  ht : hash?
Returns #f if ht contains no elements, otherwise it returns an integer that is an index to the first element in the hash table; “first” refers to an unspecified ordering of the table elements, and the index values are not necessarily consecutive integers.

For a mutable ht, this index is guaranteed to refer to the first item only as long as no items are added to or removed from ht. More generally, an index is guaranteed to be a valid hash index for a given hash table only as long it comes from hash-iterate-first or hash-iterate-next, and only as long as the hash table is not modified. In the case of a hash table with weakly held keys or keys held like ephemerons, the hash table can be implicitly modified by the garbage collector (see Garbage Collection) when it discovers that the key is not reachable.

procedure

(hash-iterate-next ht pos)

  (or/c #f exact-nonnegative-integer?)
  ht : hash?
  pos : exact-nonnegative-integer?
Returns either an integer that is an index to the element in ht after the element indexed by pos (which is not necessarily one more than pos) or #f if pos refers to the last element in ht.

If pos is not a valid hash index of ht, then the result may be #f or it may be the next later index that remains valid. The latter result is guaranteed if a hash table has been modified only by the removal of keys.

Changed in version 7.0.0.10 of package base: Handle an invalid index by returning #f instead of raising exn:fail:contract.

procedure

(hash-iterate-key ht pos)  any/c

  ht : hash?
  pos : exact-nonnegative-integer?

procedure

(hash-iterate-key ht pos bad-index-v)  any/c

  ht : hash?
  pos : exact-nonnegative-integer?
  bad-index-v : any/c
Returns the key for the element in ht at index pos.

If pos is not a valid hash index for ht, the result is bad-index-v if provided, otherwise the exn:fail:contract exception is raised.

Changed in version 7.0.0.10 of package base: Added the optional bad-index-v argument.

procedure

(hash-iterate-value ht pos)  any/c

  ht : hash?
  pos : exact-nonnegative-integer?

procedure

(hash-iterate-value ht pos bad-index-v)  any/c

  ht : hash?
  pos : exact-nonnegative-integer?
  bad-index-v : any/c
Returns the value for the element in ht at index pos.

If pos is not a valid hash index for ht, the result is bad-index-v if provided, otherwise the exn:fail:contract exception is raised.

Changed in version 7.0.0.10 of package base: Added the optional bad-index-v argument.

procedure

(hash-iterate-pair ht pos)  (cons/c any/c any/c)

  ht : hash?
  pos : exact-nonnegative-integer?

procedure

(hash-iterate-pair ht pos bad-index-v)  (cons/c any/c any/c)

  ht : hash?
  pos : exact-nonnegative-integer?
  bad-index-v : any/c
Returns a pair containing the key and value for the element in ht at index pos.

If pos is not a valid hash index for ht, the result is (cons bad-index-v bad-index-v) if bad-index-v is provided, otherwise the exn:fail:contract exception is raised.

Added in version 6.4.0.5 of package base.
Changed in version 7.0.0.10: Added the optional bad-index-v argument.

procedure

(hash-iterate-key+value ht pos)  
any/c any/c
  ht : hash?
  pos : exact-nonnegative-integer?

procedure

(hash-iterate-key+value ht pos bad-index-v)  
any/c any/c
  ht : hash?
  pos : exact-nonnegative-integer?
  bad-index-v : any/c
Returns the key and value for the element in ht at index pos.

If pos is not a valid hash index for ht, the result is (values bad-index-v bad-index-v) if bad-index-v is provided, otherwise the exn:fail:contract exception is raised.

Added in version 6.4.0.5 of package base.
Changed in version 7.0.0.10: Added the optional bad-index-v argument.

procedure

(hash-copy ht)  (and/c hash? (not/c immutable?))

  ht : hash?
Returns a mutable hash table with the same mappings, same key-comparison mode, and same key-holding strength as ht.

4.15.1 Additional Hash Table Functions🔗ℹ

 (require racket/hash) package: base
The bindings documented in this section are provided by the racket/hash library, not racket/base or racket.

procedure

(hash-union ht0 
  ht ... 
  [#:combine combine 
  #:combine/key combine/key]) 
  (and/c hash? immutable?)
  ht0 : (and/c hash? immutable?)
  ht : hash?
  combine : (-> any/c any/c any/c)
   = (lambda _ (error 'hash-union ....))
  combine/key : (-> any/c any/c any/c any/c)
   = (lambda (k a b) (combine a b))
Computes the union of ht0 with each hash table ht by functional update, adding each element of each ht to ht0 in turn. For each key k and value v, if a mapping from k to some value v0 already exists, it is replaced with a mapping from k to (combine/key k v0 v).

Examples:
> (hash-union (make-immutable-hash '([1 . one]))
              (make-immutable-hash '([2 . two]))
              (make-immutable-hash '([3 . three])))

'#hash((1 . one) (2 . two) (3 . three))

> (hash-union (make-immutable-hash '([1    one uno]  [2    two dos]))
              (make-immutable-hash '([1    eins un]  [2    zwei deux]))
              #:combine/key (lambda (k v1 v2) (append v1 v2)))

'#hash((1 . (one uno eins un)) (2 . (two dos zwei deux)))

procedure

(hash-union! ht0    
  ht ...    
  [#:combine combine    
  #:combine/key combine/key])  void?
  ht0 : (and/c hash? (not/c immutable?))
  ht : hash?
  combine : (-> any/c any/c any/c)
   = (lambda _ (error 'hash-union ....))
  combine/key : (-> any/c any/c any/c any/c)
   = (lambda (k a b) (combine a b))
Computes the union of ht0 with each hash table ht by mutable update, adding each element of each ht to ht0 in turn. For each key k and value v, if a mapping from k to some value v0 already exists, it is replaced with a mapping from k to (combine/key k v0 v).

Examples:
> (define h (make-hash))
> h

'#hash()

> (hash-union! h (make-immutable-hash '([1    one uno]  [2    two dos])))
> h

'#hash((1 . (one uno)) (2 . (two dos)))

> (hash-union! h
               (make-immutable-hash '([1    eins un]  [2    zwei deux]))
               #:combine/key (lambda (k v1 v2) (append v1 v2)))
> h

'#hash((1 . (one uno eins un)) (2 . (two dos zwei deux)))

procedure

(hash-intersect ht0 
  ht ... 
  [#:combine combine 
  #:combine/key combine/key]) 
  (and/c hash? immutable?)
  ht0 : (and/c hash? immutable?)
  ht : hash?
  combine : (-> any/c any/c any/c)
   = (lambda _ (error 'hash-intersect ...))
  combine/key : (-> any/c any/c any/c any/c)
   = (lambda (k a b) (combine a b))
Constructs the hash table which is the intersection of ht0 with every hash table ht. In the resulting hash table, a key k is mapped to a combination of the values to which k is mapped in each of the hash tables. The final values are computed by stepwise combination of the values appearing in each of the hash tables by applying (combine/key k v vi), where vi is the value to which k is mapped in the i-th hash table ht, and v is the accumulation of the values from the previous steps. The comparison predicate of the first argument (eq?, eqv?, equal-always?, equal?) determines the one for the result.

Examples:
> (hash-intersect (make-immutable-hash '((a . 1) (b . 2) (c . 3)))
                  (make-immutable-hash '((a . 4) (b . 5)))
                  #:combine +)

'#hash((a . 5) (b . 7))

> (hash-intersect (make-immutable-hash '((a . 1) (b . 2) (c . 3)))
                  (make-immutable-hash '((a . 4) (b . 5)))
                  #:combine/key
                  (lambda (k v1 v2) (if (eq? k 'a) (+ v1 v2) (- v1 v2))))

'#hash((a . 5) (b . -3))

Added in version 7.9.0.1 of package base.

procedure

(hash-filter ht pred)  hash?

  ht : hash?
  pred : (-> any/c any/c boolean?)
Filters the hash? ht based on a predicate pred applied to both its keys and values. This function constructs a new hash table that includes only those key-value pairs from the input ht for which the predicate pred returns true when applied simultaneously to the keys and values of ht. The output hash table retains the mutability and the key comparison predicate (e.g., eqv?, equal-always?, equal?) of the input hash table ht, ensuring that the structural and operational properties of the original hash are preserved in the output.

Examples:
> (hash-filter (for/hash ([num '(1 2 3 4 5)]) (values num (* num 2)))
               (λ (k v) (and (< k 3) (even? v))))

'#hash((1 . 2) (2 . 4))

> (hash-filter (make-hash) (λ (k v) (< k 3)))

'#hash()

> (hash-filter (make-hasheq '([#f . "false"] [#t . "true"]))
               (λ (k v) (and (eq? k #t) (string=? v "true"))))

'#hasheq((#t . "true"))

> (hash-filter (hash (list 1 2) 'pair (vector 3 4) 'vector)
               (λ (k v) (and (list? k) (symbol? v))))

'#hash(((1 2) . pair))

> (hash-filter (hash "one" 1 2 "two" "three" 3)
               (λ (k v) (and (not (number? k)) (number? v) (> v 1))))

'#hash(("three" . 3))

Added in version 8.13.0.4 of package base.

procedure

(hash-filter-keys ht pred)  hash?

  ht : hash?
  pred : procedure?
Filters the hash? ht based on a predicate pred applied to its keys. This function constructs a new hash table that includes only those key-value pairs from the input ht for which the predicate pred returns true when applied to the keys. Similar to hash-filter-values, the output hash table maintains the mutability and key comparator of the input hash table, ensuring that the structural and operational properties of the original hash are retained.

Examples:
> (hash-filter-keys (for/hash ([num '(1 2 3 4 5)]) (values num 0)) (λ (k) (< k 3)))

'#hash((1 . 0) (2 . 0))

> (hash-filter-keys (make-hash) (λ (k) (< k 3)))

'#hash()

> (hash-filter-keys (make-hasheq '([#f . "false"] [#t . "true"])) (λ (k) (eq? k #t)))

'#hasheq((#t . "true"))

> (hash-filter-keys (hash (list 1 2) 'pair (vector 3 4) 'vector) list?)

'#hash(((1 2) . pair))

> (hash-filter-keys (hash "one" 1 2 "two" "three" 3) (lambda (k) (number? k)))

'#hash((2 . "two"))

> (hash-filter-keys (hash 'apple "fruit" 'carrot "vegetable" "banana" "fruit")
                    (lambda (k) (symbol? k)))

'#hash((apple . "fruit") (carrot . "vegetable"))

Added in version 8.12.0.9 of package base.

procedure

(hash-filter-values ht pred)  hash?

  ht : hash?
  pred : procedure?
Filters the hash? ht based on a predicate pred applied to its values. This function returns a new hash table containing only the key-value pairs for which the predicate pred returns true when applied to the values of ht. The resulting hash table retains the mutability and the key comparison predicate (e.g., eq?, eqv?, equal-always?, equal?) of the input hash table ht.

Examples:
> (hash-filter-values (for/hash ([num '(1 2 3 4 5)]) (values num num)) (λ (v) (< v 3)))

'#hash((1 . 1) (2 . 2))

> (hash-filter-values (make-hash) (λ (v) (< v 3)))

'#hash()

> (hash-filter-values (make-hasheqv '([1 . "one"] [2 . "two"])) (λ (v) (eqv? v "two")))

'#hasheqv((2 . "two"))

> (hash-filter-values (hash 'one "1" 'two 2 'three "3") (lambda (v) (string? v)))

'#hash((one . "1") (three . "3"))

> (hash-filter-values (hash 'list (list 1 2 3) 'vector #(4 5 6) 'string "hello")
                      (lambda (v) (vector? v)))

'#hash((vector . #(4 5 6)))

> (hash-filter-values (hash 'nested-hash (hash 'a 1 'b 2) 'nested-list (list 'x 'y 'z))
                      (lambda (v) (hash? v)))

'#hash((nested-hash . #hash((a . 1) (b . 2))))

Added in version 8.12.0.9 of package base.