XREPL: eXtended REPL🔗ℹ

1 Meta REPL Commands🔗ℹ

Most of the XREPL extensions are implemented as meta commands. These commands are entered at the REPL, prefixed by a , and followed by the command name. Note that several commands correspond directly to Racket functions (e.g., ,exit) — but since they work outside of your REPL, they can be used even if the matching bindings are not available.

1.1 Generic Commands🔗ℹ

Without an argument, displays a list of all known commands. Specify a command to get help specific to that command.

Exits Racket, optionally with an error code (see exit).

Sets the current-directory to the given path. If no path is specified, use your home directory. Path arguments are passed through expand-user-path so you can use ~. An argument of - means “the previous path”.

Reports the value of current-directory.

Use ,shell (or ,sh) to run a generic shell command (via system). For convenience, a few synonyms are provided — they run the specified executables (still using system).

When the REPL is in the context of a module with a known source file, the shell command can use the F environment variable as the path to the file. Otherwise, F is set to an empty string.

Runs an editor, as specified by your EDITOR environment variable, with the given file/s arguments. If no files are specified and the REPL is currently inside a module’s namespace, then the file for that module is used. If the EDITOR environment variable is not set, use the ,drracket command instead.

Runs DrRacket with the specified file/s. If no files are given, and the REPL is currently inside a module, the file for that module is used.

DrRacket is launched directly, without starting a new subprocess, and it is then kept running in a hidden window so further invocations are immediate. (When this command is used for the first time, you will see DrRacket start as usual, and then its window will disappear — that window is keeping DrRacket ready for quick editing.)

1.2 Binding Information🔗ℹ

Searches for known bindings in the current namespace. The arguments specify which binding to look for: use a symbol (without a ') to look for bindings that contain that name, and use a regexp (e.g., #rx"...") to use a regexp for the search. Multiple arguments are and-ed together.

If no arguments are given, all bindings are listed.

For each of the specified names, describe where it is coming from and how it was defined if it names a known binding. In addition, describe the module (list its imports and exports) that is named by arguments that are known module names.

By default, bindings are searched for at the runtime level (phase 0). You can add a different phase level for identifier lookups as a first argument. In this case, only a binding can be described, even if the same name is a known module.

Uses Racket’s help to browse the documentation, look for a binding, etc. Note that this can be used even in languages that don’t have the help binding.

1.3 Requiring and Loading Files🔗ℹ

Most arguments are passed to require as is. As a convenience, if a symbolic argument specifies an existing file name, then use its string form to specify the require, or use a file in case of an absolute path. In addition, an argument that names a known symbolic module name (e.g., one that was defined on the REPL, or a builtin module like #%network), then its quoted form is used. (Note that these shorthands do not work inside require subforms like only-in.)

Same as ,require, but arranges to load the code in a way that makes it possible to reload it later, or if a module was already loaded (using this command) then reload it. Note that the arguments should be simple module names, without any require macros. If no arguments are given, use arguments from the last use of this command (if any).

Module reloading is enabled by turning off the compile-enforce-module-constants parameter — note that this prohibits some optimizations, since the compiler assumes that all bindings may change.

Uses enter! to have the REPL go “inside” a given module’s namespace. A module name can specify an existing file as with the ,require-reloadable command. If no module is given, and the REPL is already in some module’s namespace, then ‘enter!’ is used with that module, causing it to reload if needed. Using #f makes it go back to the toplevel namespace.

Note that this can be used even in languages that don’t have the enter! binding. In addition, enter! is used in a way that does not make it require itself into the target namespace.

Makes the REPL go back to the toplevel namespace. Same as using the ,enter command with a #f argument.

Uses load to load the specified file(s).

1.4 Debugging🔗ℹ

Whenever an error is displayed, XREPL will not show its context printout. Instead, use the ,backtrace command to display the backtrace for the last error.

While the ,backtrace command shows the backtrace for the last error, the ,exn command shows the entire exception. This may be useful to see the type of exception, for example.

In addition, you can specify an identifier to bind the last exception to, in which case the exception is not printed. This is bound with define, thus updating any previous top-level binding with that name.

Times execution of an expression (or expressions). This is similar to "time" but the information that is displayed is a bit easier to read.

In addition, you can provide an initial number to specify repeating the evaluation a number of times. In this case, each iteration is preceded by two garbage collections, and when the iteration is done its timing information and evaluation result(s) are displayed. When the requested number of repetitions is done, some extreme results are removed (top and bottom 2/7ths), and the remaining results are be averaged. Finally, the resulting value(s) are from the last run are returned (and can be accessed via the bindings for the last few results, see Past Evaluation Results).

Traces the named function (or functions), using trace.

Untraces the named function (or functions), using untrace.

errortrace is a useful Racket library which can provide a number of useful services like precise profiling, test coverage, and accurate error information. However, using it can be a little tricky. ,errortrace and a few related commands fill this gap, making errortrace easier to use.

,errortrace controls global use of errortrace. With a flag argument of + errortrace instrumentation is turned on, with - it is turned off, and with no arguments it is toggled. In addition, a ? flag displays instrumentation state.

Remember that errortrace instrumentation hooks into the Racket compiler, and applies only to source code that gets loaded from source and therefore compiled. Therefore, you should use it before loading the code that you want to instrument.

This command can perform profiling of code in one of two very different ways: either statistical profiling via the profile library, or using the exact profiler feature of errortrace.

When given a parenthesized expression, ,profile will run it via the statistical profiler, as with the profile form, reporting results as usual. This profiler adds almost no overhead, and it requires no special setup. In particular, it does not require pre-compiling code in a special way. However, there are some imprecise elements to this profiling: the profiler samples stack snapshots periodically which can miss certain calls, and it is also sensitive to some compiler optimizations like inlining procedures and thereby not showing them in the displayed analysis. See Profile: Statistical Profiler for more information.

In the second mode of operation, ,profile uses the precise errortrace profiler. This profiler produces precise results, but like other uses of the errortrace, it must be enabled before loading the code that is to be profiled. It can add noticeable overhead (potentially affecting the reported runtimes), but the results are accurate in the sense that no procedure is skipped. (For additional details, see Errortrace: Debugging and Profiling.)

In this mode, the arguments are flags that control the profiler. A + flag turns the profiler on — and as usual with errortrace functionality, this applies to code that is compiled from now on. A - flag turns this instrumentation off, and without any flags it is toggled. Once the profiler is enabled, you can run some code and then use this command to report profiling results: use * to show profiling results by time, and # for the results by counts. Once you’ve seen the results, you can evaluate additional code to collect more profiling information, or you can reset the results with a ! flag. You can also combine several flags to perform the associated operations, for example, ,prof *!- will show the accumulated results, clear them, and turn profiler instrumentation off.

Note that using any of these flags turns errortrace instrumentation on, even ,prof - (or no flags). Use the ,errortrace command to turn off instrumentation completely.

This command makes it easy to use the execution counts functionality of errortrace. Given a file name (or names), ,execution-counts will enable errortrace instrumentation for coverage, require the file(s), display the results, disables coverage, and disables instrumentation (if it wasn’t previously turned on). This is useful as an indication of how well the test coverage is for some file.

Runs a given file and displays coverage information for the run. This is somewhat similar to the ,execution-counts command, but instead of using errortrace directly, it runs the file in a (trusted) sandbox, using the racket/sandbox library and its ability to provide coverage information.

1.5 Configuration Commands🔗ℹ

Selects the input mode used next time that xrepl starts. The default mode tries the other three in order.

Enables or disables color in expeditor mode.

1.6 Miscellaneous Commands🔗ℹ

This powerful command controls the REPL’s namespace. While ,enter can be used to make the REPL go into the namespace of a specific module, the ,switch-namespace command can switch between toplevel namespaces, allowing you to get multiple separate “workspaces”.

Namespaces are given names that are symbols or integers, where * is the name for the first initial namespace, serving as the default one. These names are not bindings — they are only used to label the known namespaces.

The most basic usage for this command is to simply specify a new name. A namespace that corresponds to that name will be created and the REPL will switch to that namespace. The prompt will now indicate this namespace’s name. The name is usually insignificant, except when it is a require-able module: in this case, the new namespace is initialized to use that module’s bindings. For example, ,switch racket/base creates a new namespace that is called racket/base and initializes it with racket/base. For all other names, the new namespace is initialized the same as the current one.

Do not confuse namespaces with sandboxes or custodians. The ,switch command changes only the current-namespace — it does not install a new custodian or restricts evaluation in any way. Note that it is possible to pass around values from one namespace to another via past result reference; see Past Evaluation Results.

Manipulate syntaxes and inspect their expansion.

Useful operations revolve around a “currently set syntax”. With no arguments, the currently set syntax is displayed; an argument of ^ sets the current syntax from the last input to the REPL; and an argument that holds any other s-expression will set it as the current syntax.

Uses show-requires to analyze the requires of the specified module, defaulting to the currently entered module if we’re in one. See Macro Debugger: Inspecting Macro Expansion for details.

Convenient utility command to install XREPL in your Racket initialization file. This is done carefully, you will be notified of potential issues, and asked to authorize changes.

Changed in version 6.7 of package xrepl-lib: XREPL is enabled by default in the Racket REPL, which makes installation unnecessary.

2 Past Evaluation Results🔗ℹ

XREPL makes the last few interaction results available for evaluation via special toplevel variables: ^, ^^, ..., ^^^^^. The first, ^, refers to the last result, ^^ to the previous one and so on.

In addition to these names, XREPL also binds $1, $2, ..., $5 to the same references, so you can choose the style that you like. All of these bindings are made available only if they are not already defined. This means that if you have code that uses these names, it will continue to work as usual (and it will shadow the saved value binding).

The bindings are identifier macros that expand to the literal saved values; so referring to a saved value that is missing (because not enough values were shown) raises a syntax error. In addition, the values are held in a weak reference, so they can disappear after a garbage-collection.

Note that this facility can be used to “transfer” values from one namespace to another—but beware of struct values that might come from a different instantiation of a module.

3 Hacking XREPL🔗ℹ

XREPL is mainly a convenience tool, and as such you might want to hack it to better suit your needs. Currently, there is little convenient way to customize and extend it, but this will be added in the future.

3.1 Unstable and potentially unsafe modifications🔗ℹ

If you have any useful tweaks and extensions, please mail the author or the Racket developer’s mailing list.